Item Tag: Yes

CMR 6 sensor High Bay 4 pieces. Brand New, Never used. Designed for mounting heights of up to 45 ft (13.72 m), the CMR 6 Series High Bay 360º occupancysensor provides Passive Infrared (PIR) detection over a 15 to 20 ft (4.57 to 6.10 m) radial coveragepattern that overlaps the areas lit by a typical high bay fixture. This line voltage sensor switchesloads directly without the need for a power pack. The CMR 6 sensor is ideal for individual on/off control of T5/T8 fluorescent lighting. HID bi-level lighting can also be controlled when theStart-to-High (SH) option is added to the CMR 6. For multiple fixture control, multiple low voltageCM 6, HM 50, and/or HM 10 Series High Bay sensors and power packs are recommended. Withoptional flash programming via the Sensor Switch VLP mobile device application, the user caneasily change time delay, on mode and photocontrol settings.FEATURES• Push-Button Programmable, Adjustable Time Delays, and Multiple Operating Modes• 100 Hour Lamp Burn-in Timer Mode• No Field Calibration or Sensitivity Adjustments Required • Best choice for 15 to 45 ft (4.57 to 13.72 m) mounting heights• 15 to 20 ft (4.57 to 6.10 m) radial coverage overlaps area lit by a typical highbay fixture• Excellent detection of large motion (e.g. walking) up to a 35 ft (10.76 m)mounting height• Excellent detection of extra large motion (e.g. forklifts) up to a 45 ft (13.72 m)mounting height STANDARD WIRINGBLACK* - Line InputBLACK* - Load OutputWHITE - Neutral347 VAC OPTION (347)Black wires are replaced w/ Red wiresINITIAL POWER UPThe sensor’s relay is shipped in a latched closed position so the lights will come onupon initial power-up. If the lights do not immediately turn on (initial installationonly) the latching relay opened during shipment and will close within 30 secs.Note: If the sensor loses power, the internal relay will latch to on.DIMMING OPTION (D)VIOLET - Connect to Violet control wire from0-10 VDC dimmable ballastGRAY - Connect to Gray common wire fromballast} *BLACK wires can be reversedSTANDARD WIRINGBLACK* - Line Input 1BLACK* - Load Output 1BLUE** - Line Input 2BLUE** - Load Output 2WHITE - Neutral347 VAC OPTION (347)Black wires are replaced w/ Red wires} *BLACK wires can be reversed} **BLUE wires can be reversed