Item Tag: SIM7600E-H 4G HAT

DESCRIPTION Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.SIM7600E-H 4G HAT For Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, For Europe, Southeast Asia, West Asia, AfricaFor different regions, we provide multiple LTE Cat-4/Cat-1 HATs to choose from:SIM7600A-H 4G HATLTE Cat-4mainly applicable in North America (US, CA)SIM7600E-H 4G HATLTE Cat-4mainly applicable in Europe, Southeast Asia, West Asia, Africa, China, South KoreaSIM7600E LTE Cat-1 HATLTE Cat-1A7670E Cat-1 HATA7600E Cat-1/GSM/GPRS HATSIM7600SA-H 4G HATLTE Cat-4mainly applicable in Australia, New Zealand, Taiwan (China), Latin AmericaSIM7600CE 4G HATLTE Cat-4mainly applicable in China, and some Southeast Asia countriesSIM7600CE-CNSE 4G HATSIM7600CE-JT1S 4G HATA7600C1 Cat-1/GSM/GPRS HATLTE Cat-1SIM7600G-H 4G HATLTE Cat-4the global versionPlease check the supported bands according to your local service provider, select the proper one when placing order.4G HAT FOR RASPBERRY PIEnabling LTE Cat-4 4G / 3G / 2G Communication & GNSS PositioningBased on SIM7600E-H Features At A GlanceStandard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson NanoSupports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioningOnboard USB interface, to test AT Commands, get GPS positioning data, and so onOnboard CP2102 USB to UART converter, for serial debuggingBreakout UART control pins, to connect with host boards like Arduino/STM32SIM card slot, supports 1.8V/3V SIM cardTF card slot for storing data like files, messages, etc.Onboard audio jack and audio decoder for making telephone call2x LED indicators, easy to monitor the operating statusOnboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumperBaudrate: 300bps ~ 4Mbps (default: 115200bps)Autobauding baudrate: 9600bps ~ 115200bpsControl via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USATComes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)SpecificationsFREQUENCY BANDLTE Cat-4LTE-FDD: B1/B3/B5/B7/B8/B20LTE-TDD: B38/B40/B413GUMTS/HSPA+: B1/B5/B82GGSM/GPRS/EDGE: 900/1800 MHzGNSSSatellite systemsGPS/Beidou/GLONASS/GALILEO/QZSSReceiver type16-channelC/A CodeSensitivity-159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou)Cold starts: -148 dBmTime-To-First-Fix (open air)Cold starts: <35sHot starts: <1sSMS AND AUDIOSMSSupported types: MT, MO, CB, Text, PDUStorage: USIM card and ME (default)Audio featureSupports echo cancellationSupports noise reductionOTHERPower supply5VOperating voltage5V / 3.3V (configured via jumper)Operating temperature-30°C ~ 80°CStorage temperature-45°C ~ 90°CDimensions56.21mm × 65.15mmStandard Raspberry Pi 40PIN GPIOCompatible With Raspberry Pi Series Boards, Jetson NanoDial-Up On Windows/LinuxLTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink) *3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink) ** stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.Cloud CommunicationSupports Communication Protocols Including TCP/UDP/FTP/FTPS/HTTP/HTTPSGNSS PositioningSupports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS Base Station PositioningTelephone Call & SMS SupportMaking Telephone Call Or Sending SMS By AT Commands, With Onboard Audio JackWhat's On BoardSIM7600E-HCP2102 USB to UART converterNAU8810 audio decoderTXS0108EPWR voltage translatortranslates 3.3V/5V into 1.8VMP2128DT power chipSPX29302 power chipRaspberry Pi GPIO headerSIM7600 control interfacefor connecting with host boards like Arduino/STM32SIM card slotsupports 1.8V/3V SIM cardTF card slotallows data storage like files, messages, etc.3.5mm earphone/mic jackUSB interfacefor testing AT Commands, getting GPS positioning data, etc.USB to UART interfacefor serial debugging, or login to Raspberry Pi MAIN antenna connectorAUX antenna connectorGNSS antenna connectorPower switchNetwork status indicatorPower indicatorOperating voltage selection jumperconfigured via 0Ω resistor jumperVCCIO - 3.3V: set operating voltage as 3.3VVCCIO - 5V: set operating voltage as 5VUART selection jumperA: access Raspberry Pi via USB to UARTB: control the SIM7600 by Raspberry PiC: control the SIM7600 via USB to UARTPWR configuration jumperPWR - 3V3: auto startup on power-up (default)PWR - D6: startup/shutdown by the Raspberry Pi D6 pinFlight mode configuration jumperNC by default, no flight mode control pinFlight - D4: flight mode is controlled by the Raspberry Pi D4 pinUSB connector solder padsBOOT forced programming solder padsPinout DefinitionOutline DimensionsResources & ServicesWIKI: SIM7600E-H_4G_HAT* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.Selection Guide SIM7600CE-JT1SSIM7600CE-TSIM7600ESIM7600E-HSIM7600A-HSIM7600G-HApplicable regionsChinaEurope/Southeast Asia/West Asia/Africa/China/South KoreaNorth AmericaGlobalBandLTE Cat-4LTE-FDDB1/B3/B5/B8LTE-TDDB38/B39/B40/B41LTE-FDDB1/B3/B5/B7/B8/B20LTE-TDDB38/B40/B41LTE-FDDB2/B4/B12LTE-FDDB1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66LTE-TDDB34/B38 /B39/B40/B413GUMTS/HSDPA/HSPA+B1/B8TD-SCDMAB34/B39CDMA1X/EVDO BC0UMTS/HSPA+B1/B5/B8UMTS/HSPA+B2/B5UMTS/HSDPA/HSPA+B1/B2/B4/B5/B6/B8/B192GGSM/GPRS/EDGE900/1800 MHzN/AGSM/GPRS/EDGE850/900/1800/1900MHzGNSSN/AGPS/Beidou/GLONASS/GALILEO/QZSSData RateLTE Cat-4150Mbps(DL)/50Mbps(UL)N/A150Mbps(DL)/50Mbps(UL)LTE Cat-1N/A10Mbps(DL)/5Mbps(UL)N/A3G (HSPA+)42Mbps(DL)/5.76Mbps(UL)2G (EDGE)236.8Kbps(DL/UL)N/A236.8Kbps(DL/UL)2G (GPRS)85.6Kbps(DL/UL)N/A85.6Kbps(DL/UL)Software FeaturesNetwork protocolTCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNSDial-up protocolPPP/NDIS/RNDISUSB driverWindows XP/7/8/10, Linux (driver free for Raspbian)Hardware InterfacesSIM card slotCompatible with 1.8V and 3V SIM cardUARTSupports AT commands through UART, compatible with 3.3V/5V operating voltageUSB portSupports AT commands testing, network communication, firmware upgrading, etc.USB to UARTSupports serial debugging, or login to Raspberry PiAudio jackSupports audio actions like making telephoto callTF card slotYes, for storing data like files, messages, etc.N/AYesAntenna connectorLTE main antennaLTE main antenna + LTE diversity antenna + GNSS antennaApplicationsExamplesHealthcare, smart payment, Internet talk, environmental monitoring, energy monitoring, fleet management, smart industry, intelligent agriculture, etc. PACKAGE CONTENT Weight: 0.191 kgSIM7600E-H 4G HAT x1LTE Antenna x1GPS External Antenna (B) x1USB type A plug to micro plug cable x2RPi screws pack (2pcs) x112345