Item Tag: Plastic
167 posts
125-180Pcs Rubber Grommet Assortment Fire Wall Wiring Line Gasket Kit
Rubber Grommet Assortment Fire Wall Firewall Wiring Wire Gasket KitFingertip pressure snap-locks into its mounting hole.Absorbs vibration and insulates cables, tubing, or shafts with limiting internal clearance.Widely used in electrified railway and power grid wire insulation protection, cable snap bushing insulated protection reliable.
July 4, 2026
20pcs 3/4 Inch LED Marker Lights – 3rd Gen Round Mini Amber/Red Clearance Lights
Durability for Any Conditions: We didn't just make these trailer marker lights waterproof - we made them IP68 grade. These might be the last lights you ever need to buy. The Universal Problem Solver: From heavy-duty semis to weekend campers, these 12 volt LED lights adapt to any job.
July 4, 2026
10 x CR2032 CR2025 3V Coin Cell Battery Holder Lithium Button Battery Case
Coin Cell Battery Holder — powers 3V circuits from CR2032/CR2025 coin cell. Connect the red lead to the positive (+) side of your circuit and the black lead to ground (-). For 12V LED circuits driven by the 8x AA holder, use a 360-510 ohm 1/4W resistor per LED at 20mA.
July 4, 2026
1 x CR2032 CR2025 3V Coin Cell Battery Holder Lithium Button Battery Case
Coin Cell Battery Holder — powers 3V circuits from CR2032/CR2025 coin cell. Connect the red lead to the positive (+) side of your circuit and the black lead to ground (-). For 12V LED circuits driven by the 8x AA holder, use a 360-510 ohm 1/4W resistor per LED at 20mA.
July 4, 2026
5 x CR2032 CR2025 3V Coin Cell Battery Holder Lithium Button Battery Case
Coin Cell Battery Holder — powers 3V circuits from CR2032/CR2025 coin cell. Connect the red lead to the positive (+) side of your circuit and the black lead to ground (-). For 12V LED circuits driven by the 8x AA holder, use a 360-510 ohm 1/4W resistor per LED at 20mA.
July 4, 2026
2 x CR2032 CR2025 3V Coin Cell Battery Holder Lithium Button Battery Case
Coin Cell Battery Holder — powers 3V circuits from CR2032/CR2025 coin cell. Connect the red lead to the positive (+) side of your circuit and the black lead to ground (-). For 12V LED circuits driven by the 8x AA holder, use a 360-510 ohm 1/4W resistor per LED at 20mA.
July 4, 2026
Spare Tire Brake Light for 2018-2025 Jeep Wrangler JL JLU 405 LEDs Super Bright
Spare Tire Brake Light for 2018-2025 Jeep Wrangler JL JLU 405 LEDs Super Bright 3rd Rear Third Brake Light Plug-N-Play Easy Install Wheel Light for Jeep Wrangler JL JLU Accessories. It accommodates 5-lug bolt patterns with 4-1/2", 5", or 5-1/2" spacing.
July 4, 2026
IDC 26 Pins Connector Flat Ribbon Cable Female Connector 30cm 2.54mm Pitch,5pcs
Description:26 Pins Connector Flat Ribbon Cable,2.54mm Pitch Easily and directly inserted into PCBSuitable for internal wiring in office equipment, audio and video machines Specifications:Product Name: Flat Ribbon CableMain Materials: Plastic Pin Number: 26Pin Pitch: 2.54mm Length: 30cm / 11.8-inchTotal Width: 30mm / 1.18-inchWithstand Voltage: 300VConnector Type: Female Connector Package Content:5pcs x Flat Ribbon Cable.
July 4, 2026
Injection Blow Mold Radio Test Equipment Case Ammo Gun Tool OSD 10.5x13x4″Deep
Usable space is 8.5" x 11" x 3" deep.just about the size of a ream of paper. No provision for a lock and does not include foam. Not waterproof. The radio and the phone book are for illustration only and are not included.
July 4, 2026
Wire Number Tube Cable Marker, 0.2 X 0.2In Colorful Clip on Wire Marker
The colorful tube cable marker is bright, conspicuous and easy to identify. Plastic Material: Cable marking 0-9 is made of Plastic, which has high toughness and can swing with the direction of wire installation.
July 4, 2026