Item Tag: IG144-HV

DCE/IG144-HVStandalone with AC power module, 90-264 VAC or 100-400 VDC The Data Connect DCE/IG144 high-speed V.32bis dial-line modems are designed and manufactured for rugged industrial applications over the Public Switched Telephone Network (PSTN). The DCE/IG144 utillizes the industries latest V.32bis modem technology to deliver outstanding features, performance, and reliability in one cost-effective solution. The DCE/IG144 modem are ideally suited for industrial communication applications including SCADA systems,RTs, traffic monitor and control, and industrial automation networks. The DCE/IG144 supports RTUs equipped with an EIA RS-232 or RS-485 serial port. Data communications speeds up to 14.4 kbps in reception and up to 9.6 kbps in transmission are supported. . The modems incorporate the latest data-compression and errorcorrection standards for improved data transmission and reception over marginal and poor-quality telephone lines. Multiple levels of security with password verification and security call back keep your valuable data secure from intruders. The DCE/IG144 modems are powered by a wide range of AC and DC power supply voltages. Its low power consumption and low stand-by current technology design makes the DCE/IG144 ideal for a battery-powered system as well as regular AC powered operations. Key Features Worldwide Operation Support:- ITU-TV.32bis/V.32 - V.22bis/V.22/V.23/V.23/V.21- Bell 212A/Bell 103 - V29 FastPOS - V.22bis fast connect Data Compression:- V.44/V.42bis/MNP 2 Error Correction:- V.42/MNP 2/MNP 4 DTE/ Host InterfaceEIA RS-232 and RS-485 Embedded AT command set Sixty-three embedded and upgradeable country profiles for worldwide homologation NVRAM for configuration and country profile storage Built-in remote diagnostics and configuration management Heavy-duty surge protection provided at power supply and phone line interface Supports wide range of AC & DC power supply options Supports DC power supplied fromDTE or DB-9 connector Wide range of operating temperatures Optional mounting kits for DIN Rail mounting or wall mount General Specifications Data Rate Support Data modem: ITU-T V32bis: Up to 14.4kbps receive & 9.6kbps transmit V.32bis: Up to 14400 bps V.32: Up to 9600 bps V.22bis: Up to 2400 bps V.21: 0-300 bps Bell 212A: 1200 bps Bell 103: 0-300 bps Fax modem: Send and receive fax up to 14.4 kbps V17, V29, V27ter, and V21 channel 2 EIA/TIA 578 Class 1, T.31 Class 1.0, and Class 2 Data Format: Asynchronous, 7, 8 or 9 data bits, parity, 10- or 11-bit character with 1 or 2 stop bits Modulation Fully compatible with ITU-T V.32bis/V.22bis/V.21 Bell 212A and Bell 103 compatible modes Transmission Line Interface 2-wire full-duplex over PSTN Connector: RJ-11C DTE/RTU InterfaceThe modem provides serial ports to support RS-232 or RS-485 (selectable) interface standards: RS-232Interface Connector: DB9-F Signals: RTS, CTS, CD, TD, RD, DTR, DSR, RI RS-485Interface Connector: RJ-11C Signals: 4-wire full-duplex or 2-wire half-duplex TX+, TX-, RX+, RX- Front Panel Indicators LED. Indicators:DTR, TXD, RXD, DCD, DSR, RI Power Supply Specifications Three models support various power options: Stand-alone: 90 – 264VAC Stand-alone: 100 – 400VDC Stand-alone: 10 – 48 VDC Power Consumption: Idle mode: 65 mA@12V, 0.78 watts Normal mode: 75 mA@12V, 0.9 watts, typical Mechanical Specifications Enclosure dimensions: 4.1”(W) x 5.0”(L) x 1.3” (H) 104mm(W) x 127mm(L) x 33mm(H) Weight: 0.5 pound, without AC power module Environment Specifications Temperature: Operation: -40o to + 85o C Storage: -40o to + 85o C Humidity: Up to 95 % non-condensing Dry Contact Detection (optional) Two optical isolated dry contact detections are provided for external devices (consult factory for additional information). Ordering InformationDCE/IG144Standalone with AC power module 90-264 VAC DCE/IG144DCStandalone, DC Power, 10-48 VDC DCE/IG144-HVStandalone with AC power module, 90-264 VAC or 100-400 VDC DCE/IG202T-DINDCE EN2 Din Rail Kit