The Latest

Item Tag: Buyer

5254 posts

Honeywell S7800A2142 4-Line Keyboard Display Module – Replacement for S7800A1001

The S7800A2142 Keyboard Display Module is the newest and most intuitive way to interact with any 7800 Series Flame Relay module. The new display is packed full of features and, best of all, it is compatible with ALL 7800 SERIES burner controls. The S7800A2142 Keyboard Display Module (KDM) provides current system status along with first-out annunciation and system diagnosis using a five-row by 64-column readout. The KDM provides local or remote annunciation of operation and fault information, remote reset, report generation, burner control data and diagnostic information. The KDM is part of the 7800 SERIES of microprocessor-based burner controls for gas, oil, coal or combination fuel single burner applications. The 7800 SERIES is programmed to provide a level of safety, functional capabilities and features beyond the capacity of conventional controls. The S7800A2142 is required to program the Valve Proving feature of selected 7800 Series devices. The S7800A2142 KDM offers the following technical advancements to the 7800 SERIES devices:Compatible with installed Honeywell 7800 SERIES systems.When used with the new 7800 SERIES with Valve Proving Feature, the KDM allows for programming the Valve Proving Control feature and timing (Pass Code protected feature).When used with the new 7800 SERIES with Postpurge feature, the KDM allows for programming the Postpurge time (Pass Code protected feature).Allows for naming the S7830 Expanded Annunciator terminals to match your system drawings. (Displayed message only.)(Pass Code protected feature.)An eight line by twenty column readout set of “Call Service” (Business Card) alpha/numeric directions can be displayed instead of the standard lockout display message. (Pass Code protected feature).Enable ModBus communication feature.Configure language for English, Spanish, or French.On-line troubleshooting guide.
by
July 5, 2026

(5PCS) SSM2142P ANALOG DEVICES SP Amp Line Driver Amp Single ±18V 8-Pin PDIP

THIS LISTING IS FOR (5PCS) OF SSM2142P BY ANALOG DEVICES **THESE PARTS HAVE NEVER BEEN USED. LEADS STRAIGHTENED. POSSIBLE TOOL MARKS ON LEADS. SPECIFICATIONS Mfr Package Description MINI, DIP-8 Status Discontinued Analog IC - Other Type ANALOG CIRCUIT JESD-30 Code R-PDIP-T8 JESD-609 Code e0 Neg Supply Voltage-Nom (Vsup) -18.0 V Number of Functions 1 Number of Terminals 8 Operating Temperature-Min -40.0 Cel Operating Temperature-Max 85.0 Cel Package Body Material PLASTIC/EPOXY Package Shape RECTANGULAR Package Style IN-LINE Peak Reflow Temperature (Cel) NOT SPECIFIED Qualification Status Not Qualified Supply Voltage-Nom (Vsup) 18.0 V Surface Mount NO Temperature Grade INDUSTRIAL Terminal Finish Tin/Lead (Sn/Pb) Terminal Form THROUGH-HOLE Terminal Position DUAL Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED Listing and template services provided by inkFrog
by
July 5, 2026

KTC-75 100 125 150 175 200 250 250 275mm Linear displacement transducer

Hi, friend Welcome to my store Please contact me if you have any questions. KTC-75 100 125 150 175 200 250 250 275mm Linear displacement transducer [Model] KTC-(50mm-1250mm) lever type [Measurement stroke] 50mm-1250mm [Repeat accuracy] 0.05mm [Protection level] IP67 IP54 IP57 [Application] Injection molding machine, die casting machine, blowing machine, shoe making machine, printing machine, woodworking machinery, cable machinery, linear displacement equipment, rotary cutting machine, planer automation control equipment and other fields. Can't connect the wrong three lines The "1" and "3" lines are power lines, and the "2" is the output line. Except that the power line ("1", "3" line) can be exchanged, the "2" line can only be the output line. Once the above-mentioned lines are connected incorrectly, linear errors will occur, control is very difficult, control precision is poor, and jumping is easy to display. Installation is better for neutral The angle allows ±12° error, and the parallelism allows ±0.5mm. If the angle error and the parallelism error are both too large, the display digital jump will be caused. In this case, be sure to adjust the angle and parallelism. Prevent short circuit During the operation of the displacement sensor electronic ruler, the data is displayed at a certain point or not, and the data is skipped or not displayed. In this case, it is necessary to check whether the insulation of the connection line is damaged and a short circuit to the ground caused by regular contact with the metal casing of the machine. Avoid aging Note: For the electronic ruler which has been used for a long time, the seal is aging, there may be many impurities, and there is a mixture of oil and water, which affects the contact resistance of the brush, which causes the display to jump. It can be considered as the early damage of the displacement sensor electronic scale itself. If the electronic ruler has been used for a long time, and the seal has deteriorated, and there are many impurities, and the water mixture and oil will seriously affect the contact resistance of the brush, the number of the display will keep jumping. At this time, it can be said that the electronic scale of the linear displacement sensor has been damaged and needs to be replaced. KTC is a general-purpose type suitable for position detection of various types of equipment. Such as: injection molding machine, die casting machine, rubber machine, shoe machine, EVA injection machine, woodworking machinery, hydraulic machinery, etc. KTF is a general-purpose installation miniaturization, especially suitable for reducing the installation length of the mechanical length direction, suitable for large stroke applications. Such as: large injection molding machine clamping stroke, rubber machine clamping stroke, woodworking machinery, hydraulic machinery. KTM is a series of miniature drawbars, especially suitable for applications with small space, such as: aircraft steering, ship steering, shoemaking machinery (front helper, rear helper), thimble position control of injection molding machine, printing machinery, paper packaging machinery. KTR is a miniature self-recovery type, which is especially suitable for occasions where space is limited and inconvenient to install. Such as: vacuum bottle blowing machine, IT equipment, tension adjustment, speed adjustment, printing machinery, paper packaging machinery.
by
July 5, 2026

ALLEN BRADLEY 141A-GS54RR25 / 141AGS54RR25 (USED)

ALLEN BRADLEY 141A-GS54RR25 / 141AGS54RR25 (USED) STANDARD BUSBAR MODULE, 32 AMP, 3 PHASE, 690 V, 6 KV, 600 VAC, WITH WIRES, FOR USE WITH 5 MM OR 10 MM THICK BUSBARS Part Number141A-GS54RR25CategoryCircuit BreakerSubcategoryBusbar Includes 2 Year Radwell Warranty. All products are guaranteed to be working but may show signs of use. All items supplied by radwell_international are covered with a comprehensive 2 Year Radwell Warranty. FACTORY WARRANTY MAY NOT APPLY. RADWELL 2-YEAR WARRANTY INCLUDED About Us Radwell International (formerly known as plccenter) currently stocks tens of thousands of new and used ready-to-ship items. radwell_international offers substantial cost savings while receiving quality products. Thank you again for visiting radwell_international. For order questions and technical support please contact us via the eBay Message System/Contact Seller. Looking for items that are hard to find or discontinued? Visit our other eBay shop, Radwellplccenter (formerly RadwellOverstock), here. Turnaround Time Due to the nature of the products, Standard order processing is 2-10 business days plus shipping method chosen. If you have any questions, please contact us via the eBay Message System/Contact Seller. Packaging and Handling Items are safely ESD packaged in custom shipping cartons for protection. Shipping International Customers are responsible for all Customs fees, import taxes, VAT, and other fees applied by their respective countries. Items that must go by LTL Freight Carrier due to size or weight restrictions, buyer will be contacted to pay additional freight. Quoted Flat Rate applies to items that can be shipped USPS Priority Mail, UPS Ground, or FedEx Ground. Next Day and Second Day Air service is available for an additional fee. Next Day and Second Day Air service and all International Orders will be charged an appropriate rate. We ship worldwide from New Jersey, USA using USPS, UPS, FedEx, DHL, or Truck Freight when needed. Call to use a shipping service other than the ones listed. Flat Rate Domestic Shipping will be USPS Priority Mail, UPS Ground, or FedEx Ground, at our discretion. All shipments are fully insured. Terms radwell_international ships worldwide and accepts PayPal and most Credit Cards. All items are priced each. All items are subject to availability and passing our QA testing and inspection. For Customer Service please contact us via the eBay Message System/Contact Seller. Disclaimer radwell_international is a Division of Radwell International, Inc. Radwell International, Inc. sells new and surplus product and develops channels to purchase such product. The product is used surplus. Radwell is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Radwell is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
by
July 5, 2026